Product Guide: Presentation Switchers

Product Guide: Presentation Switchers

Overview

KanexPro Presentation Switchers are designed for medium-to-large conference rooms where multiple BYOD and legacy sources need to share one or two displays. Both models feature HDBaseT 3.0 extension to 70m, Dante audio networking, USB-C with PD charging, USB 3.2 KVM, and seamless switching for clean, instant source transitions.

SKUs

SKUTitleKey Differentiator
SW-4X2PS-70M4×2 HDMI/USB-C 4K60 Seamless Presentation Switch with HDBaseT 3.0 70m Out4 sources, 2 displays, dual HDMI/HDBaseT output
SW-5X1PS-70M5×1 HDMI/USB-C 4K60 Seamless Presentation Switch with HDBaseT 3.0 70m Out5 sources, 1 display, consolidates all BYOD + legacy

SW-4X2PS-70M — 4×2 Dual Display

Designed for rooms with two displays (main + confidence monitor, or dual projection) and up to 4 mixed sources.

  • Inputs: HDMI ×3, USB-C ×1 (60W PD)
  • Outputs: HDMI ×1, HDBaseT 3.0 ×1 (70m, 4K60 4:4:4)
  • Switching: Seamless (no blackout), multiview (PiP/PoP/quad)
  • Audio: Dante AV port, balanced analog I/O, HDMI ARC
  • USB: USB 3.2 KVM host port
  • Network: Dual 1G Ethernet with 802.1x
  • Control: Front panel, IR remote, RS-232, IP

SW-5X1PS-70M — 5×1 Single Display

Designed for rooms with one primary display and up to 5 mixed sources — the maximum flexibility for BYOD walk-up presentations.

  • Inputs: HDMI ×4, USB-C ×1 (60W PD)
  • Output: HDMI ×1 + HDBaseT 3.0 ×1 (70m, 4K60 4:4:4)
  • Switching: Seamless (no blackout), multiview support
  • Audio: Dante AV port, balanced analog I/O
  • USB: USB 3.2 KVM host port
  • Network: Dual 1G Ethernet with 802.1x
  • Control: Front panel, IR remote, RS-232, IP

Shared Key Features

  • Seamless switching: Source transitions are instantaneous with no black frame — critical for live presentations.
  • HDBaseT 3.0 to 70m: Single CAT6a cable carries 4K60 video, audio, USB, Ethernet, and power to the display up to 70 meters away.
  • Dante audio: Dedicated Dante network port for routing audio to any Dante-enabled device on the network.
  • USB-C BYOD: Walk-up USB-C connection with video + 60W PD charging. No drivers required.
  • Multiview: Display two or four sources simultaneously (PiP, side-by-side, quad view).
  • 802.1x: Corporate network authentication on both Ethernet ports.

Choosing Between Models

  • Two displays needed: SW-4X2PS-70M
  • 5 sources, one display: SW-5X1PS-70M
  • Both: Contact KanexPro for multi-room configurations

Related Articles